How to Pair 2 Bitty Boomers: A Complete Guide

Introduction: With the rise in popularity of portable Bluetooth speakers, Bitty Boomers have emerged as a top choice for music enthusiasts. These compact and powerful speakers offer excellent sound quality and can be paired together to create a truly immersive audio experience. If you’re wondering how to pair 2 Bitty Boomers, you’ve come to the right place! In this article, we will guide you through the step-by-step process of pairing these miniature speakers, allowing you to enjoy your music like never before.

Step 1: Preparing Your Bitty Boomers Before pairing your Bitty Boomers, ensure that they are fully charged. Connect each speaker to a power source using the included USB cable and allow them to charge until the LED light on each unit turns solid green. This indicates that both speakers are fully charged and ready for pairing.

Step 2: Powering On Your Bitty Boomers Once fully charged, press and hold the power button on each speaker simultaneously for a few seconds until you see the LED light start flashing rapidly. This means that both speakers are now in pairing mode and ready to connect with each other.

Step 3: Establishing Connection between Speakers Now that both speakers are in pairing mode, bring them close together ensuring they are within range (typically around 30 feet). The two speakers will automatically search for each other’s Bluetooth signal and establish a connection. This process usually takes a few seconds, but it may vary depending on your surroundings.

Step 4: Verifying Successful Pairing To check if your Bitty Boomers have successfully paired with each other, observe their LED lights. Once connected, the LED lights on both speakers will flash slowly in sync. This indicates that they have formed a stereo pair and are ready to provide an enhanced audio experience.

Step 5: Adjusting Stereo Settings (Optional) If you prefer a specific speaker to function as the ‘left’ or ‘right’ channel, you can adjust the stereo settings accordingly. To do this, simply press and hold the power button on one of the speakers until you hear an audible tone. This will set that speaker to either left or right channel mode. Repeat this process for the other speaker, ensuring they are assigned to different channels.

Step 6: Testing Your Bitty Boomers Now that your Bitty Boomers are successfully paired and customized to your stereo preference, it’s time to test them out! Play your favorite music or audio content from a Bluetooth-enabled device and enjoy the enhanced sound quality delivered by these powerful little speakers.

Tips for Optimal Performance:

  1. Keep both speakers within close proximity during pairing for a seamless connection.
  2. Ensure there are no interference sources such as large metal objects or other electronic devices nearby.
  3. Make sure your audio source (e.g., smartphone, tablet) is not connecting to any other Bluetooth devices while pairing.
  4. If you encounter any difficulties during pairing, turn off both Bitty Boomers, wait a few seconds, and then repeat the entire process from Step 2 onwards.

Conclusion: Pairing two Bitty Boomers is a simple and straightforward process that allows you to amplify your listening experience by creating a stereo soundstage. By following the step-by-step guide outlined above, you can easily pair your Bitty Boomers together within minutes. So grab your favorite tunes and get ready to immerse yourself in high-quality sound with these compact yet impressive portable speakers!